|
 |
XPS board (HOSFOAM)
Hosfoam's application
- To go along with steel structure building, iron house and colorful wave roofing.
- Cold storage, keep cool and water resistant.
- cover of underground groove, compressive strength.
- Sunset wall, office ceiling.
- Wall insulation for heart/noise.
- Vapor resistant of ground slab.
|
Hosfoam's Specification |
Thickness |
15mm-60mm |
15mm-60mm |
Width |
900mm |
600mm |
Length |
1800mm |
1200mm |
- Upon your request, HOSFOAM's dimension can be adjusted. Make it convenience to fit your construction needs.
- Flat foam board at 3-7mm thickness are also available.
|
|
| |
Product / Value test method |
Properties |
Product/Value |
Test Method |
Density |
43 kg/m 3 +/-5 |
CNS2536 |
Compressive strength |
>=1.8 kgf/cm 2 |
CNS2536 |
Flexural strength |
>=2.0 kgf/cm 2 |
CNS2536 |
Water absorption |
<= 0.07g.m 2 .h.mm Hg |
CNS2536 |
Thermo conductive |
<= 0.029 Kcal/m.h. °C |
CNS2536 25+/-5 °C |
|
| |
Care and Caution for Applying
- Although flame retardants additives, which prevent it form self-ignition, are added, HOSFOAM is not structure material nor fireproof product. Exposure to extreme temperature may melt HOSFOAM or cause fire. While applying HOSFOAM, proper flaming and fire barriers must be installed with.
- HOSFOAM is not suggested to have direct contact with surface exceed 75 degree Celsius, such as chimney, heater vent, steam pipe, etc.
- Prolong exposure to sun light will cause color fading. While work outdoor, make sure place protection cover material over HOSFOAM and keep away from fire sources.
- Do not use volatilizable-contain adhesive to avoid of eroding.
Read more |
|
|
|
|
Authorised distributor for: |
|
|
|
|
|
|
|
|
|
| |
|
|
